Skip to Content

Karcher K2 How To Connect To Hose

So you’ve just got a Karcher K2 pressure washer and you are wondering how the bleeding heck do you connect it up to a garden hose. Well, let me help you out with this quick guide.

The first thing you need is this hose connector which screws onto the back of the Karcher K2. If you got your pressure washer new then this will have come included in the box but if not you might have to buy one. Worry not though they are available cheaply.

Below is the photo of the hose adapter, as you can see it is only a little bit of plastic.

Hose Adapter
Hose Adapter

This screws onto the back of the pressure washer here.

Hose adapter screws on here
Hose adapter screws on here

Make sure it is on tight but don’t overdo it as you may struggle if you ever need to take it off.

Screw on the adapter
Screw on the adapter

Now simply push your hose on, any push-fit connector will work here.

Hose pushes on
Hose pushes on

And there we have it, this Karcher K2 is now fully connected up to our garden hose. If your hose has a different connector on the end then I would suggest fitting a push-fit like this to it.

They are really easy to install and connect to pretty much everything you could need.

Nice and Easy
Hozelock Hose end connector
£1.89
Buy Now On Amazon
We earn a commission if you click this link and make a purchase at no additional cost to you. This helps fund the Bloke Cave and allows us to create epic projects!
07/05/2022 12:07 am GMT